Absolutely. We recommend to design the coatings system in 2 primer coats + 2 topcoats, 4 coats in total, with a film thickness over 250µm.

Generally speaking, the application solid content of polysiloxane coatings can reach over 95%. For a film thickness of 80-100μm, the spreading rate is 0.16 kg/m², equivalent to 6 m²/kg.

Yes, of course. Applying polysiloxane coatings on wind turbine towers and blades is relatively typical and innovative application. The anti-icing performance is good. We recommend to create the primer-topcoat-in-one coating with polysiloxane resins. 

The adhesion of epoxy polysiloxane coatings on aluminum, galvanized substrates is not very good, it requires pairing with a suitable epoxy primer.

When applied polysiloxane coatings over smooth ceramic or glass surfaces, a primer with good adhesion is required. 

Polysiloxane resin is relatively sensitive to alkalinity, so avoid to use highly alkaline additives, weakly alkaline additives are acceptable. It is also highly sensitive to moisture, avoid solvents/pigments with high moisture. Mimimize exposure to high-humidity environments during production. Keep tightly sealed to prevent air exposure.